|
SFL, TORONTO, 2 March 2009 – The Canadian Advanced Nanospace eXperiment 2 (CanX-2)
nanosatellite is nearing the completion of its first year in orbit. Having been developed on a shoestring
budget, nearly 100 times cheaper than a traditional satellite of similar capabilities, the 3.5 kg, milk-carton-
sized satellite continues to perform well in low Earth orbit. Launched on 28 April 2008 on board Polar
Satellite Launch Vehicle (PSLV) C9 from India, CanX-2 carries a number of miniature satellite
technologies that have been demonstrated to work well in space. “Within only three months of on-orbit
operation, we were able to verify the performance of all the technologies on board CanX-2,” says Dr.
Robert E. Zee, Director of the Space Flight Laboratory (SFL) at the University of Toronto. “We are now
well into the second phase of the mission, performing atmospheric science experiments. This is an
unprecedented milestone achievement for Canada. CanX-2 is Canada’s smallest operational satellite in
history.”
 CanX-2 is much more than its tiny size would suggest. Among a suite of custom, low power electronics, it
carries a novel propulsion system developed at SFL that will be used to support a formation flying
demonstration mission involving two satellites, CanX-4 and CanX-5 in the near future. A commercial GPS
receiver on board CanX-2 has also been shown to work well. In addition to providing precise updates on
the satellite’s position in orbit, the GPS receiver is being used by Professor Susan Skone at the University
of Calgary to perform radio occultation experiments – measurements of delays in GPS signals through the
atmosphere to infer atmospheric properties such as water vapor and total electron content. CanX-2 is likely
the smallest satellite to perform such scientific investigation from Earth orbit.
In addition to Professor Skone’s experiment, CanX-2 carries a compact spectrometer developed by
Professor Brendan Quine at York University, that measures concentrations of greenhouse gases in the
atmosphere. At present, the satellite is alternating between the two science experiments, gathering
important data about our planet, while demonstrating leading edge satellite technology. Indeed, the
experiments would not be possible without CanX-2’s barrier-breaking miniature attitude control system that
enables three-axis stabilization of the satellite to within a few degrees.
“We have an outstanding student apprenticeship program, but the key to low-cost is not the involvement of
students. Though we do train students at SFL to be the satellite engineers of tomorrow, the key to low-cost
is SFL’s use of the ‘microspace’ philosophy,” says Zee. The microspace approach to building satellites
allows SFL to achieve low-cost through reduced formality, tightly integrated design teams, and the
judicious use of commercially available parts. Such parts are similar to those you would find in your cell
phone or personal data assistant. “We’ve had some great customers, including Defence R&D Canada and
the Canadian Space Agency, who are willing to trust us to get the job done according to our microspace
experience,” adds Zee. “Often large agencies will be tempted to protect their investment by getting
involved in the design decisions or development approaches themselves. Our customers know that the
contractor is already motivated to do a good job.”
The Space Flight Laboratory also builds custom separation systems, or the devices that eject satellites from
their launch vehicles. The XPOD developed by SFL is a customizable separation system that can
accommodate a wide variety of satellite sizes and shapes. SFL uses its XPOD separation systems to
support low-cost launches of multiple nanosatellites arranged through its Nanosatellite Launch Service
(NLS) program.
CanX-2 is a project supported by Defence R&D Canada (Ottawa), the Canadian Space Agency, the Natural
Sciences and Engineering Research Council (NSERC), MDA Space Missions, and the Ontario Centres of
Excellence.
|
